Hunter Ceiling fans Installation And Operation Manual
Hide thumbs
Also See for Hunter Ceiling fans:
- Installation manual (44 pages) ,
- Installation and operation manual (31 pages) ,
- Installation instructions manual (6 pages)
Table of Contents
Advertisement
For Your Records and Warranty
Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a
copy of your receipt to the manual.
42639-01 • 4/5/07
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter Hunter Ceiling fans
Summary of Contents for Hunter Hunter Ceiling fans
- Page 1 For Your Records and Warranty Assistance Model Name: _____________________ Catalog/Model No.: ________________ Serial No.: ________________________ Date Purchased: ___________________ Where Purchased: _________________ For reference also attach your receipt or a copy of your receipt to the manual. 42639-01 • 4/5/07...
-
Page 2: Table Of Contents
Light Fixture ..........10 • To reduce the risk of fire, electrical shock, or motor damage, do not 8 • Operating and Cleaning use a solid-state speed control with this fan. Use only Hunter speed Your Ceiling Fan..........13 controls. - Page 3 Support Brace Hunter’s patented 3-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of three ways, depending on ceiling height and your preference: Low Profile, Standard, or Angle mounting. The steps in this manual include Ceiling instructions for all three Installer’s Choice mounting methods.
-
Page 4: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 5: Installing The Ceiling Plate
Do not over tighten. Flat Washer 3” Wood Screw For Angled Ceilings: Be sure to orient the ceiling plate so that the arrows printed on the ceiling plate are pointing towards the ceiling peak. 42639-01 • 4/5/07 Hunter Fan Company... -
Page 6: Assembling And Hanging The Fan
Low Profile Screw Step 3-8 3-8. Raise the fan and place the hook on the ceiling plate through the U-shaped U-shaped hole in the rim. Hole Hunter Fan Company 42639-01 • 4/5/07... -
Page 7: Wiring The Fan
4-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box. 42639-01 • 4/5/07 Hunter Fan Company... -
Page 8: Installing The Canopy And Canopy Trim Ring
1. Locate the tab indicators, small bumps on top of tabs. 2. Press firmly on opposite sides of the ring towards the canopy. The tabs will flex out releasing the trim ring from the canopy. Step 5-3 Steps 5-4 – 5-5 Canopy Screw Hunter Fan Company 42639-01 • 4/5/07... -
Page 9: Assembling The Blades
6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert Step 6-1 (Detail) them by hand into the holes on the blades. -
Page 10: Completing Your Installation With A Light Fixture
Failure to properly Upper Assembly Switch attach and tighten all three assembly screws could result in the Screw Housing switch housing and light fixture falling. 10 10 Hunter Fan Company 42639-01 • 4/5/07... - Page 11 7-7. The last installation step when installing the light fixture is to 7-8. install the glass bowl. See “Installing the Glass Bowl” on page 12 for instructions. Lower Switch Housing 11 11 Plug Connector Detail Housing Assembly Screw 42639-01 • 4/5/07 Hunter Fan Company...
- Page 12 6. Thread the fan pull chain and light pull chain through the appropriate holes. 7. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight. Metal Rod Metal Disk Glass Bowl Cover Plate Breakaway Connector Finial Hunter Fan Company 42639-01 • 4/5/07...
-
Page 13: Operating And Cleaning Your Ceiling Fan
To Change Airflow Direction Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan. Reversing Reversing Switch Switch 42639-01 • 4/5/07 Hunter Fan Company... -
Page 14: Troubleshooting
3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 2500 Frisco Avenue Memphis, Tennessee 38114 Hunter Fan Company 42639-01 • 4/5/07...
Need help?
Do you have a question about the Hunter Ceiling fans and is the answer not in the manual?
Questions and answers