HP BACKCOPY Reference Manual page 278

Cause. The RESTORE process issued an unexpected WRITE operation. RESTORE should only read
data from the UNPAK process.
Effect. The program abends. Possibly a saveabend file is created. The archive extraction is
interrupted.
Recovery. This is an internal error. Report it to your service provider.
TACL creation failed: error pc-err,detail-err
Cause. The -after option was specified, but the needed TACL process could not start because of a
PROCESS_CREATE_ error pc-err. detail-err is the detailed error code.
Effect. The program abends. Possibly a saveabend file is created. No archive is created, and no
files are extracted.
Recovery. Code 1,48 indicates a security violation. You might need to log on as a different user
ID. For an explanation of and possible recovery from other process creation errors, see the Guardian
Procedure Errors and Messages Manual.
This is an encrypted file - please supply a password
Cause. The archive file is encrypted, but the -password option was not given in the UNPAK
command.
Effect. The program stops with completion code 2. No files are extracted.
Recovery. Supply the correct password and try again.
This is a multi-file archive; filesize=filesize,
totalbytes=totalsize
Cause. UNPAK read the header of an archive file and determined that this is a multi-file archive.
The maximum size of each file is filesize bytes. The total size of all files is totalsize bytes.
Effect. The program continues.
Recovery. Informational message; no corrective action is necessary.
This is not an encrypted archive
Cause. The -password option was given in the UNPAK command, but the archive file is not an
encrypted archive. It does not start with the letters PAKX.
Effect. The program stops with completion code 2. No files are extracted.
Recovery. Use a correct file name, remove the password option, or re-create the archive.
Total bytes: num-bytes
Cause. PAK created an archive. num-bytes is the number of bytes of data received from the
BACKUP process.
Effect. None.
Recovery. Informational message; no corrective action is necessary.
Unable to create temporary file
Cause. The -after or @infile option was specified, but the needed temporary file could not
be created. error is the value of the errno variable after calling function fopen().
278 PAK/UNPAK Messages
filename' (error error)