HP BACKCOPY Reference Manual page 272

Cause. The string specified in the -comment option is too long. The maximum length is 255 characters
not including the surrounding quotes.
Effect. The program stops with completion code 2. No archive is created.
Recovery. Correct the syntax and try again.
Compressed bytes: num-bytes
Cause. PAK has created an archive. num-bytes is the number of compressed data written to the
archive file.
Effect. None.
Recovery. Informational message; no corrective action is necessary.
Compression failed; error code error
Cause. The ZLIB library reports the error code error while compressing data.
Effect. The program stops with completion code 2. The created archive file is purged.
Recovery. This is an internal error. Report it to your service provider.
Decompression failed; error code error (address address;
count count)
Cause. The ZLIB library reports the error code error while uncompressing data. The address
value is the offset of the compressed data in the archive and count is the number of bytes to be
uncompressed.
Effect. The program stops with completion code 2. The archive extraction is interrupted.
Recovery. This probably indicates an invalid or corrupted archive file. Ensure that the archive has
been created successfully with PAK and transferred without problems.
Decryption failed; code error
Cause. The CBCDESDECODE function returned error code error.
Effect. The program abends. Some files might have been extracted.
Recovery. This is an internal error. Report it to your service provider.
Encryption failed; code error
Cause. The CBCDESENCODE function returned error code error.
Effect. The program abends. The archive was created but is probably invalid.
Recovery. This is an internal error. Report it to your service provider.
Error error opening file
Cause. The file-system error error was encountered when opening the archive file filename.
Effect. The program stops with completion code 2. The created archive file is purged.
Recovery. For an explanation and possible recovery, use the ERROR command or see the Guardian
Procedure Errors and Messages Manual.
Error error when writing to file filename
272 PAK/UNPAK Messages
filename'