HP BACKCOPY Reference Manual page 257

Cause. The tape could not be recognized. This could have been caused by mounting a tape not
produced by BACKUP or by parity or checksum errors or a corrupted tape.
Effect. RESTORE rewinds and unloads the tape and prompts for a tape.
Recovery. If the drive used has a manual density switch, make sure that it is set to the correct density
and try again. If the problem persists, see the cause and recovery for error
8107
Found a regular labeled tape.
Cause. A labeled tape (but not a BACKUP labeled tape) was mounted when a tape produced by
BACKUP was expected.
Effect. RESTORE rewinds and unloads the tape and prompts for the correct tape.
Recovery. Mount the correct tape.
8108
Found a pre-C00 TMF tape.
Cause. A TMF tape with a version prior to C00.00 was mounted when a tape produced by BACKUP
was expected.
Effect. RESTORE rewinds and unloads the tape and prompts for the correct tape.
Recovery. Mount the correct tape.
81 10
Tape is not an Archive tape.
Cause. An Archive tape was expected, but not found.
Effect. RESTORE rewinds and unloads the tape and prompts for the correct tape.
Recovery. Mount the correct tape.
81 1 1
A TMF Archive tape was not expected.
Cause. A TMF Archive tape was mounted instead of an Archive tape produced by BACKUP.
Effect. RESTORE rewinds and unloads the tape and prompts for the correct tape.
Recovery. Mount the correct tape.
81 12
Tape is not from the same tape set.
Cause. A tape from a different tape set was mounted.
Effect. RESTORE rewinds and unloads the tape and prompts for the correct tape.
Recovery. Mount the correct tape.
8025 (page 237).
8107 257