HP BACKCOPY Reference Manual page 205

Recovery. Informational message only; no corrective action is needed.
7159
The NOSQLDATA option is active. No SQL data is being
recovered from this tape.
Cause. A RESTORE command was entered using the NOSQLDATA option.
Effect. All data contained in SQL files is skipped during the RESTORE. An empty version of each
SQL object on tape is created at the target location.
Recovery. Informational message only; no corrective action is needed.
7251
Disk volume diskname is in the diskstate. It must be in the
DOWN state.
Cause. A disk volume was in a state other than down.
Effect. BACKUP or RESTORE terminates.
Recovery. Bring down the disk volume and retry the operation.
7252
Not a volume mode BACKUP tape.
Cause. An attempt was made to RESTORE a tape that was not a volume-mode BACKUP tape.
Effect. RESTORE terminates.
Recovery. Mount the correct tape and retry the operation.
7253
The capacity of the target disk must be greater than or equal
to the size of the disk image on tape.
Cause. An attempt was made to perform a RESTORE, but the capacity of the target disk was
insufficient.
Effect. RESTORE terminates.
Recovery. Specify a target disk that has sufficient space and retry the operation.
7254
Target disk process type must match the disk process type of
the source disk on tape.
Cause. An attempt was made to perform a RESTORE, but the target disk-process type did not match
the disk-process type on tape.
Effect. RESTORE terminates.
Recovery. Specify a target disk with the same disk process type as the disk image on tape.
7159 205