Fan Motor - Hoshizaki KM-61BAH Service Manual

10. FAN MOTOR

1) Unplug the icemaker or disconnect the power source.
2) Remove the Louver.
3) Disconnect the Connector of the Fan Motor lead.
4) Remove the two screws securing the Fan Motor Bracket and pull out the Fan Motor
in the arrow direction. To prevent deformation, do not hit the Fan on the Condenser
or other parts.
5) Install the new Fan Motor in the reverse order of the removal procedure.
6) Refi t the Louver in its correct position.
7) Plug in the icemaker or connect the power source.
Condenser
Fig. 9
Fan Motor
Fan Motor Bracket
Screw
54