Honeywell Design and Application Technical Reference Manual page 185

When the demo is opened, the STATUS
screen will appear. To step through the items
on the status menu, click on the return button.
The first item "ECONO AVAIL YES" will
appear on the screen under STATUS. This
information is telling the operator that the
current status of the economizing function is
the conditions are good for economizing. In
the upper right corner of the screen a down
arrow appears. This means you can use the
down arrow button to scroll to the next status
item which is "ECONOMIZING". On this
screen you will see both up and down arrows
in the upper right of the screen which means
you can either scroll up or down. AT the end
of the STATUS menu, you can use the left
button with the up arrow in a circle to go up to
the root menu screen and "STATUS" will again
appear. You can use the down arrow to go to
the next root menu which is "SYSTEM
SETUP". Note in the STATUS menu you could
not change the values because JADE
reporting the status of the system. In the
SYSTEM SETUP menu items you will see an
enter arrow in front of the value which allows
you to change the value of the item. For
example if you want to change the units for
degrees from F to C then you scroll down to
the menu item UNITS DEG and click on the
enter button. F will appear on the screen with
an up arrow in the upper right hand of the
screen. If you click on the up arrow the units
change to C. Click on the enter arrow and
"CHANGE STORED will appear momentarily
on the screen. You have now changed all set
up and status for temperature to degrees C.
To change it back to F you simply go to the
Units Deg item in the SYSTEM SETUP menu
and change it back to F.
Using the buttons and screen you can walk
through all of the functions of the JADE
Refer to the menu tables in section 11 for
description of the functions of JADE
the instruction on the web page to download
the file.
TM
is
179
Section 15 - Demo for W7220
TM
.
TM . Follow
Honeywell Economizers 63-8594-02