Honeywell Design and Application Technical Reference Manual page 146

Section 11 - W7220 JADE™ Economizer Module
Close this file and go back to your PC Module tool program.
Now that you know the correct COM Port, click on the Settings drop down menu and choose the
one that matches your device manager port for TUSB3410 Device.
If the port that the TUSB3410 file does not show up on your settings list for the port, close the file
and reopen it. This means you opened the file before the P C Module was connected to your
personal computer.
To the right of Setting there is Help menu button. The Help menu provides an explanation about
each system configuration setting and provides the parameters and functions of specific set
points.
The configuration screen allows you to choose your System configuration. Note these are the
same configuration settings that are available using menus buttons in the JADE™ controller.
63-8594-02 Honeywell Economizers 140