Power Trim/Tilt Switch - Honda Marine BF75A Owner's Manual

3. CONTROLS (REMOTE CONTROL TYPE)
Power TrimRiM Switch
(remote control lever)
Power Ikim
Press the power trim/tilt switch on the
remote control lever to adjust the
motor trim angle from Onto 20' to main-
tain proper boat trim. The power
trim/tilt switch located on the remote
control lever can be operated while the
boat is under way or while stopped.
By
using the power trim/tilt switch, the
operator can change the trim angle of
the motor to achieve maximum boat
acceleration, speed, stability and
maintain optimum fuel consumption.
Power Tilt
Press the power trim/tilt switch on the
remote control lever to asjust the
motor tilt angle from 2030 72".
By using the power trim/tilt switch, the
operator can change the tilt angle of
the motor for shallow water operation,
beaching, launching from a trailer, or
mooring.
38
TRIM ANGLE
Excessive trim/tilt angle during
operation can cause the propeller
to raise out
of
the water and cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
Pump.
SINGLE TYPE
POYER TRIMILT SWITCH
DUAL TYPE
POWER TRImILT SWlTCIi
CLEW
(RIGHT)
CONTROL
LEVER