8. TRANSPORTING
Transporting
on a vehicle
When transporting the outboard motor
on a vehicle, perform following.
1. Remove the engine cover (see page 7 1).
HOOKS
BOLTS
TIMINGBELTCOVER
2. Remove the four tightening bolts
and the three hooks, then remove
the timing belt cover.
LIFTING
EYE
\
STARTER
PULLEY
3. Install the lifting eye (optional
part)
in the center of the starter pulley
and tighten securely.
B
If the lifting
eye is
not securely
installed
in the
starter
pulley,
the outboard
motor
could fall from the hoist, causing
serious
injury.
Be
sure
the
lifting eye is securely
installed before hoisting the outboard
motor.
102