Power Trim/Tilt Switch - Honda Marine BF75A Owner's Manual

3. CONTROLS (REMOTE CONTROL)
Power 'lXn/Tilt Switch
Power Mm
Press the power trim/tilt switch on the
remote control lever to adjust the
motor trim angle from 0" to 20" to
maintain proper boat trim. The power
trim/tilt switch located on the remote
control lever can be operated while the
boat is under way or while stopped.
By using the power trim/tilt switch, the
operator can change the trim angle of
the motor to achieve maximum boat
acceleration, speed, stability and
maintain optimum fuel consumption.
TRIM ANGLE
Power Tilt
Press the power trim/tilt switch on the
remote control lever to adjust the
motor tilt angle from 20" to 72".
By using the power trim/tilt switch, the
operator can change the tilt angle of
the motor for shallow water operation,
beaching, launching from a trailer, or
mooring.
POWER TRIM/TILT SWITCH
CONTROL LEVER
k
Excessive trim/tilt angle during
operation can cause the propeller
to raise out
of
the water and
cause
propeller ventilation and engine
over-revving. Excessive trim/tilt
angle can also damage the water
pump,
32