Table of Contents
Advertisement
BEFORE OPERATION
Check the General Condition of the Snowblower:
Look around and underneath the snowblower for signs of oil or
gasoline leaks.
Check the auger housing and the discharge chute for accumulation
of packed snow or ice. Clean the auger housing and discharge chute
before starting the snowblower.
Look for signs of damage.
Check each control for proper operation.
Check the battery electrolyte level (see page
Check the auger and blower for loose or broken bolts. If broken,
replace them with new ones (see page
Check the skid and scraper (see page
Check that all nuts, bolts, and screws are tightened.
Check that the indicators work properly.
Check the entire machine for any other faults that might have been
caused previously.
Check the Engine
Check the oil level (see page
Check the fuel level (see page
to eliminate or reduce operating interruptions for refueling.
36
85
).
42
).
79
).
77
). Starting with a full tank will help
89
).
Advertisement
Table of Contents
