Table of Contents
Advertisement
Auger Housing Height
1.
Operate the auger housing control switch back and forth. The auger
housing height can be adjusted without discrete steps.
To raise: Pull the auger housing control switch to UP.
To lower: Push the auger housing control switch to DOWN.
2.
Release the auger housing control switch, and the auger housing is
secured in the position.
HIGH:
Use this position when clearing the snow in steps and use
it when reversing or driving the snowblower. (When the
mode selector switch is AUTO or POWER, use this
position when reversing the snowblower.)
MIDDLE:
Position for normal clearing. (Use this position to clear
the snow normally.)
LOW:
Position for clearing hardened snow. (Use this position
when the snow you are to clear is hardened and the snow
clearing part of the snowblower tends to get raised.)
U
U
P
P
D
D
O
O
W
W
N
N
AUGER HOUSING
CONTROL SWITCH
OPERATION
AUGER HOUSING
HIGH (UP)
MIDDLE
LOW (DOWN)
45
Advertisement
Table of Contents
