Table of Contents
Advertisement
Reset Switch
Use the reset switch to return the auger housing to the reset height
position (current set position). This switch is convenient to move the
auger housing by operating the auger housing control switch and to
return the auger housing to the original height position. The reset
height position has been set at the factory in the position where the
snow clearing part contacts the ground with the snowblower set on a
level ground.
The reset height position can be changed (see page
position changing procedure).
The reset switch can not reset the right and left direction of the auger
housing angle to the reset position.
CONTROLS & FEATURES
O
O
F
F
F
F
O
O
N
N
RESET SWITCH
63
for reset height
27
Advertisement
Table of Contents
