Check The General Condition Of The Snowblower; Check The Engine - Honda HS928 Owner's Manual

Check the General Condition of the Snowblower:

• Before each use, look around and underneath the snowblower for
signs of oil or gasoline leaks.
• Check the auger housing and the discharge chute for accumulation of
packed snow or ice. Clean the auger housing and discharge chute
before starting the snowblower.
• Look for signs of damage.
• Check each control for proper operation.
• Check the auger and blower for loose or broken bolts. If broken,
replace them with new ones (see page 50).
• Check the skid shoes and scraper for wear. Replace them if
necessary (see page 51).
• Check that all nuts, bolts, and screws are tightened.

Check the Engine

• Check the oil level (see page 41).
• Check the fuel level (see page 39). Starting with a full tank will help
to eliminate or reduce operating interruptions for refueling.
• Check the hydrostatic fluid level in the reservoir (see page 44). Use
only Honda Hydrostatic Fluid.
BEFORE OPERATION
19