Check The General Condition Of The Snowblower; Check The Engine - Honda HS928 Owner's Manual

Check the General Condition of the Snowblower:

Look around and underneath the snowblower for signs of oil or
gasoline leaks.
Check the auger house and the discharge chute for accumulation of
packed snow or ice. Clean the auger housing and discharge chute
before starting the snowblower.
Look for signs of damage.
Check each control for proper operation.
Check the auger and blower for loose or broken bolts. If broken,
replace them with new ones (see page
Check the skid shoes and scraper for wear. Replace them if
necessary (see page
Check that all nuts, bolts, screws are tightened.

Check the Engine

Check the oil level (see page
Check the fuel level (see page
to eliminate or reduce operating interruptions for refueling.
Check the hydrostatic fluid level in the reservoir (see page
only Honda Hydrostatic Fluid.
52 ).
42 ).
40 ). Starting with a full tank will help
BEFORE OPERATION
51 ).
45 ). Use
19