Table of Contents
Advertisement
OPERATION
DRIVE CLUTCH
LEVER
MAIN SHIFT LEVER
AUGER CLUTCH SWITCH
50
N (neutral)
The auger and blower will start to
turn when the drive clutch lever and
auger clutch switch is operated.
Check around the snowblower for
safety before operating the lever
and switch.
3)
Check that the main shift lever is in
the N (neutral) position and squeeze
the drive clutch lever.
4)
Push the auger clutch switch to
operate on the auger and blower.
The indicator (green) comes on
when you push the auger clutch
switch.
When the auger clutch switch is
pushed for four seconds or longer,
the protection function gets
armed. This stops the auger and
blower from turning.
The auger and blower keep
turning while the drive clutch
lever is squeezed. Push the auger
clutch switch again to stop the
auger and blower. (Interlocking
operation of the drive clutch lever
and auger clutch switch)
Advertisement
Table of Contents
