GReddy Turbo Kit Installation Manual page 17

E-manage Installation
Install the e-manage and the rpm adapter as shown in the diagram. Make sure to solder all
connections except for the ones that are supplied with the male and female connectors.
Important!
• Make sure you fully understand the diagram before attempting this installation.
• Improper wiring can damage the ECM and the vehicle's electrical system.
• GReddy Performance Product, Inc. will not be responsible for any damage caused by
improper installation.
• Please do not use crimp connectors or t-tap connectors. These can cause poor
connection and prevent e-manage to operate properly.
(Part Used #61, 62, 63, 64)