Oil Pressure Line Installation
Install the oil pressure line to engine block using provided fittings.
600mm line is for the right side and 800mm line is for the left side.
Exhaust Manifold Installation
1. Remove all factory exhaust manifold stud bolt off from the cylinder head. Install the
provided M10 x 35mm stud bolts on to the cylinder head as shown.
Install Stud Bolt
Left Side (Driver's Side)
2. Install the Exhaust Manifold using provided gasket and hardware.
Left Side (Driver's Side)
(Part Used #20, 21, 22, 23, 24)
Install Stud Bolt
Right Side (Passenger's Side)
(Part Used #3, 4, 54, 74)
Right Side (Passenger's Side)
(Part Used #74)