Goldair GBQS250 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Goldair Manuals
  4. Grill
  5. GBQS250
  6. Operating instructions manual

Goldair GBQS250 Operating Instructions Manual

Supremo 6 burner barbecue
Hide thumbs Also See for GBQS250:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Instructions Manual
SUPREMO 6 BURNER BARBECUE
OPERATING INSTRUCTIONS
For model: GBQS250

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GBQS250 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Goldair GBQS250

Summary of Contents for Goldair GBQS250

  • Page 1 SUPREMO 6 BURNER BARBECUE OPERATING INSTRUCTIONS For model: GBQS250...

  • Page 2: Use Outdoors Only

    USE OUTDOORS ONLY This BBQ shall only be used in an above ground open-air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convection. Any outdoor enclosure in which the BBQ is used shall comply with one of the following: •...
  • Page 4 NO. Description Figure Description Figure QTY NO. Hood Bottom Tray Left Door Cooking Grid Warming Rack Door Handle Right Door Side Table Flame Tamer Door Axle Cart Bracket Catser Body Magnet Back Left Leg Front Right Leg Front Left Leg Back Right Leg Side Panel Side Handle...
  • Page 5 NO. Description Figure Side Burner Table Side Burner Rack Side Burner Side Burner Cover Electric Pole Screw (M6X10) Clip Screw (M4X12) Screw (M3X10) Nut (M3)
  • Page 6 Back Left Step 1 Back Right Front Right Front Let 16Pcs M6X10 Step 2 4Pcs M6X10...
  • Page 7 Step 3 Step 4 4Pcs M6X10 2Pcs M3X10 (M3) 2Pcs...
  • Page 8 Step 5 4Pcs M6X10 Step 6 8Pcs M6X10...
  • Page 9 Step 7 Step 8 8Pcs M6X10...
  • Page 10 Step 9 Step 10 M6X10 4Pcs...
  • Page 11 Step 11 M4X12 2Pcs Step 12...
  • Page 12 Step 13 2Pcs M4X12 Step 14 2Pcs M4X12...
  • Page 13 Step 15 Clip 2Pcs...
  • Page 14 DO NOT Use spanner to tighten all gas fittings Lean over BBQ when lighting Check all gas hose and line connections for Leave cooking food unattended damage, cuts or cracks each time you use the Store combustible material, gasoline or flammable BBQ.

  • Page 15: Retain This Manual For Future Reference

    Failure to follow these instructions may result in injury and/or property damage. If you have any questions concerning assembly or operation, consult Goldair or an LPG Gas supplier. When used always place the appliance and cylinder on flat level ground.

  • Page 16: Gas Cylinder Information

    4. Using a brush or spray bottle apply the solution to the gas line and each join in the gas line. 5. Bubbling of the solution will indicate that there is a leak present. 6. Re-tighten or re-seal any joints that are leaking. 7. If a leak persists then contact Goldair or a Gas Service Agent.
  • Page 17 For safe use of your grill and to avoid injury: DO NOT let children operate or play near the BBQ. KEEP BBQ area clear and free from materials that burn. DO NOT block holes in bottom or back of BBQ. Check burner flames regularly.

  • Page 18: Lighting The Side Burner

    LIGHTING YOUR BARBEQUE LIGHTING INSTRUCTIONS MAIN BURNERS: 1. Ensure all packaging material has been removed from your BBQ. 2. Turn the control knobs clockwise to “OFF” position. 3. Connect the regulator to the gas bottle. Turn the gas supply “ON” at the cylinder. Check with the use of soapy water for any gas leakage between the bottle and the regulator.
  • Page 19 MATCH LIGHTING THE SIDE BURNER: 1. Open the lid to the side burner before lighting. 2. Make sure control knob is in the "OFF" position. 3. Strike and carefully place a match approximately 1/2" (1 to 2 cm) from the burner. 4.

  • Page 20: Natural Hazard Spiders

    Powder Coated BBQ’s Overtime grease, fat and other cooking oils may build up on your BBQ. To clean, wash with warm/hot soapy water. Wash off soapy water with warm/hot clean water, leave to air dry. Once dry, use a non-stainless steel BBQ exterior cleaner, this will apply a protective coating on the exterior of the BBQ and assist in repelling the elements.

  • Page 21: Troubleshooting

    Troubleshooting Problem Possible Cause Prevention/Solution •Wire and/or electrode covered with •Clean wire and/or electrode with rubbing Burner(s) will not light using ignition. cooking residue. alcohol and clean swab. •Electrode tip not in proper position. ••Reconnect wires or replace electrode/wire •Wires are loose or disconnected. assembly.

  • Page 22: Troubleshooting-Electronic Ignition

    Troubleshooting-Electronic Ignition Problem Possible Cause Check Procedure Prevention/Solution •Not installed properly. •Check battery orientation •Install battery (make sure No sparks appear at any that “+” and “-” connectors electrodes when ignition button is pushed; no are oriented correctly, with “+” end up and “-” end noise can be heard from spark module.
  • Page 23 SERVICING & SPARE PARTS Your gas BBQ should be serviced annually by a certified gas service agent SUPPORT AND TECHNICAL ADVICE North Shore City, Auckland, New Zealand Monday – Friday 8am-5pm Phone: 0800 232 633 Website: www.goldair.co.nz...
  • Page 24 Your Goldair product has been inspected, tested and is guaranteed subject to the following for a period to one year from the date of purchase against defects in workmanship and materials. During this period, such defects will be rectified by repair or replacement of the product purchased.

Table of Contents