Qlgc_Zoningservice : Cim_Zoneservice - Qlogic 3000 Series Reference Manual

MaxNumZonesPerZoneset
ZoneNameMaxLen
ZoneNameFormat
SupportedConnectivityMemberTypes
Supported WBEM Operations




Associations


QLGC_ZoningService : CIM_ZoneService

There will be one instance of zoning service associated to the switch
(CIM_ComputerSystem) that is hosting the CIMAgent. The Zoning service is used
for operations that create either a zone, zoneset, zone alias, zone member, or the
association objects that link them together. Deletion of these objects may be done
using intrinsic methods.
Supported Properties and Methods
SystemCreationClassName
CreationClassName
59223-03 E
Property will contain the maximum number of zones that a zoneset
may contain.
Property will contain the numeric value 64. This property is the
maximum number of characters allowed in an alias, zoneset, or zone
names.
Property will contain the enumerated value 3-AlphaNumeric. This
property applies to the alias, zoneset, and zone names.
Property will contain the following array of enumerated values
representing the types of zone members that may be added to a zone
or alias.

2-Permanent Address

3-Network Address

4-Switch Port ID
getClass
getInstance
enumerateInstances
enumerateInstanceNames
QLGC_FCSwitchZoningCapabilities : CIM_ElementCapabilities —
1to1 relationship to QLGC_FCSwitch
Property will contain the string "QLGC_Switch"
Property will contain the string "QLGC_ZoningService"
3–Fabric Zoning Classes
QLGC_ZoningService : CIM_ZoneService
3-3