Qlogic 3000 Series Reference Manual page 37

Request Status Codes:
ElementName
InstanceID
Supported WBEM Operations






Associations
QLGC_FCSwitchConfigurationData : CIM_ElementSettingData
1to1 relationship to QLGC_FCSwitch
59223-03 E
Returns:

0: Success

5: Invalid Parameter. One or more parameters do not conform
to the parameter limitations above.

16000: Validate Only Request Not Supported; ValidateOnly
must be FALSE

16001: ConfigurationData is invalid; Validation failure during
while applying configuration.

16002: Element Does Not Support Initial/Default Configs;
TypeOfConfiguration must be 2

16003: Element Does Not Support Possible Configs/Config;
TypeOfConfiguration must be 2

16005: Element Cannot Be Configured; Probably the result of
an invalid ManagemedElement parameter.

CIM_ERR_ACCESS_DENIED: User does not have
authorization for this command, or another user is configuring
the switch, retry later.

CIM_ERR_INVALID_PARAMETER: One or more required
parameters are missing.

CIM_ERR_NOT_FOUND: The ConfigurationData instance was
not found.
Property will contain the string "Switch Configuration Image"
Opaque Identifier
getClass
getInstance
enumerateInstances
enumerateInstanceNames
createInstance
invokeMethod
1–Switch Management Classes
CIM_ConfigurationData : CIM_SettingData
1-25