Qlgc_Fcportcapabilities : Cim_Fcportcapabilities - Qlogic 3000 Series Reference Manual

QLGC_FCPortCapabilities :
CIM_FCPortCapabilities
There will be an instance of FCPortCapabilities for every port on the switch
hosting the CIMAgent. This class is used to determine the configuration options
for an FCPort. Port capabilities will vary by port, and may change for a given port
as a result of hardware or license changes.
Supported Properties and Methods
InstanceID
ElementName
ElementNameEditSupported
MaxElementNameLen
RequestedStatesSupported
RequestedSpeedsSupported
59223-03 E
Opaque Identifier
Property will contain the string "FC Port Capabilities"
Property will contain a boolean value that will be TRUE if the
FCPort.ElementName property may be modified, or FALSE if the
property is read-only.
Property will contain the maximum string length of the
FCPort.ElementName property.
Property will contain an array of one or more acceptable values for the
FCPort.RequestStateChange method.
Possible values are:

2-Enabled: Port is online.

3-Disabled: Port is offline

7-Test: Port is in diagnostics mode.
Property will contain an array of one or more acceptable values for the
FCPortConfig.RequestedSpeed property.
Possible values are:

1062500000: 1Gbps

2125000000: 2Gbps

4250000000: 4Gbps

12750000000: 10Gbps (4channel)

8500000000: 8Gbps

25500000000: 20Gbps
Port speed configuration is not affected by GBIC capabilities. That is, a
4-Gbps port may be configured to 4-Gbps even if a -2Gbps GBIC is
installed.
1–Switch Management Classes

QLGC_FCPortCapabilities : CIM_FCPortCapabilities

1-11