Advertisement
NetworkAddresses
OperationalStatus
PermanentAddresses
PortType
59223-03 E
(Local/Remote)Property will be NULL
(NS)Property will contain the FibreChannel address identifier
(FCID) formatted as 6 uppercase hex digits.
Operational Status is an array containing a single value as follows. It
represents the operational status of the port, not the configured port
settings. Supported values are:
(Local/Remote)
00-Unknown: Remote port state is unknown, and/or port is not
installed.
02-OK: Port is ONLINE and passing traffic.
06-Error: Error trying to link to remote device or switch, or boot
diagnostic error.
10-Stopped: Port is operationally OFFLINE as a result of either
not being connected to anything, or as a result of being
disabled (configured "OFFLINE" or "DOWN").
11-InService: Port has been configured to a diagnostic state.
(NS)
0-Unknown
Property will contain the port WWN.
Port Type represents the value negotiated during the port login
procedure. It does not represent the configured port type. Supported
values are:
00-Unknown: (Local/Remote) G/GL port is not linked, or data is
unknown.
10-N: (NS) Node Port
11-NL: (NS) Node Port in FC-AL mode
14-E: (Local/Remote) Fabric Expansion port linked to another
switch.
15-F: (Local/Remote) Fabric Port linked to an N port.
16-FL: (Local/Remote) Fabric Port linked to one or more NL
ports via FC-AL.
16000-Donor (local) Port is in Donor Mode and is unusable
2–Fabric Discovery Classes
QLGC_FCPort : CIM_FCPort
2-5
Advertisement
