Advertisement
Supported WBEM Operations
Associations
59223-03 E
11-Reset: Switch will perform a hard reset.
Job: Ignored, command is synchronous.
TimeoutPeriod, must be zero second interval, or NULL,
command is synchronous.
Returns:
0 - Success
6 - In Use: Switch is being configured by another user.
4097 - Invalid State Transition: RequestedState parameter
value is out of range.
4098 – Use of Timeout Parameter Not Supported
Request Status Codes:
CIM_ERR_ACCESS_DENIED: User does not have
authorization for this command.
CIM_ERR_INVALID_PARAMETER: One or more required
parameters are missing.
CIM_ERR_NOT_FOUND: The FCSwitch instance was not
found.
getClass
getInstance
enumerateInstances
enumerateInstanceNames
modifyInstance
setProperty
invokeMethod
QLGC_FCSwitchObjectManager : CIM_HostedService
— 1to1 relationship to QLGC_ObjectManager
QLGC_FCSwitchConformsToProfile : CIM_ElementConformsToProfile
— 1to1 relationship to QLGC_RegisteredProfile
QLGC_FCSwitchConformsToSubProfile :
CIM_ElementConformsToProfile
— 1toMany relationship to QLGC_RegisteredSubProfile
(RegisteredName="Zone Control", "Software", "Enhanced Zoning and
Enhanced Zoning Control")
QLGC_FCSwitchCIMXMLCommMechanism :
CIM_HostedAccessPoint
— 1to1 relationship to QLGC_CIMXMLCommunicationsMechanism
2–Fabric Discovery Classes
QLGC_FCSwitch : CIM_ComputerSystem
2-13
Advertisement
