Advertisement
AccessInfo
ElementName
InfoFormat
Supported WBEM Operations
59223-03 E
QLGC_RemoteServiceAccessPoint : CIM_RemoteServiceAccessPoint
Property will contain the a string value using standard URI syntax,
except for the ethernet interface which is simply the ipaddr.
ServiceType and Value
snmp: snmp://<communityname@<ipaddr> for
SNMPv1 & SNMPv2
snmp://<ipaddr> for SNMPv3
telnet: telnet://<ipaddr>
ssh: ssh://<ipaddr>
EmbeddedGUI: http://<ipaddr>
ethernet: <ipaddr>
Where:
ipaddr = Only the preferred IPv4 and IPv6 address for
each service will be returned for each service type. IPv4
addresses will be in dot-decimal notation. IPv6
addresses will be in IPv6 text notation (rfc2373),
however if it is part of a URL, it will be enclosed in
square brackets (rfc2732).
Communityname = The SNMPv2 community name
string used to authenticate the client.
Property will contain the string value "Access Point"
Property will contain an enumerated value describing the format of the
AccessInfo property.
ServiceType and Value:
snmp: 200-URL
telnet: 200-URL
ssh: 200-URL
EmbeddedGUI: 200-URL
ethernet: 3-IPv4 Address or 4-IPv6 Address
getClass
getInstance
enumerateInstances
enumerateInstanceNames
invokeMethod
1–Switch Management Classes
1-23
Advertisement
