Planning; Devices - Qlogic SANbox 3810 Installation Manual

2

Planning

Consider the following when planning a fabric:

Devices

Device Access
Performance
Switch Services
Internet Protocol Support
Security
Fabric Management
Devices
When planning a fabric, consider the number of devices and the anticipated
demand. This will determine the number of ports that are needed and in turn the
number of switches.
Consider the transmission speeds of your adapters and SFPs. The switch
supports 1-Gbps, 2-Gbps, 4-Gbps, and 8-Gbps transmission speeds depending
on the SFP.
NOTE:
Setting an SFP port to 1-Gbps that has an 8-Gbps SFP transceiver will down
the port.
Consider also the distribution of targets and initiators. An F_Port supports a single
device. An FL_Port can support up to 126 devices in an arbitrated loop.
59268-00 A 2-1