Quick Start Guide F I B R E C H A N N E L S W I T C H I N S T A L L A T I O N ® S A N b o x 3 0 5 0 ®...
Page 3
Quick Start Guide Congratulations on your purchase of the SANbox 3050™ Fibre Channel switch. This Quick Start Guide describes how to install and activate your SANbox 3050 switch using a Windows workstation. Prerequisites • Workstation • Operating systems: • Windows NT/2000/2003 •...
Step 1. Verify the Package Contents The SANbox 3050 Fibre Channel Switch is shipped with the following items: 1 SANbox 3050 Fibre Channel Switch 1 Power cord 4 Rubber feet 2 Mounting brackets 8 Mounting screws 1 CD NOTE: Small Form-factor Pluggable (SFP) transceivers, if ordered, are packaged separately. Step 2.
Step 4. Apply Power to the Switch ❑ Attach the supplied power cable to the INPUT switch and wall outlet or power strip. POWER LED Verify that the Input Power LED is on. HEARTBEAT ❑ The switch runs its self tests and begins normal operation –...