Power Supplies And Fans; Switch Management; Quicktools Web Applet - Qlogic SANbox 3810 Installation Manual

General Description

Power Supplies and Fans

Power Supplies and Fans
The SANbox 3810 switch has a single power supply that converts 100–240 VAC
to DC voltages for the various switch circuits. Internal fans provide cooling. The
switch monitors internal air temperature, and therefore does not monitor or report
fan operational status. Air flow is front-to-back. To energize the switch, plug the
power cord into the switch AC receptacle and into a 100–240 VAC power source.

Switch Management

The switch supports the following management tools:

QuickTools Web Applet

Command Line Interface
Application Programming Interface
Simple Network Management Protocol
Storage Management Initiative–Specification (SMI-S)
File Transfer Protocols
QuickTools Web Applet
To provide basic switch management tools in a graphical user interface and to
make switch management less dependent on a particular platform, each switch
contains a web applet called QuickTools. You run QuickTools by opening the
switch IP address with an internet browser. QuickTools provides the following
management features:
Faceplate device management
Switch and port statistics
Configuration wizard
Zoning administration
Fabric tree for fabric management
User account configuration
Switch and fabric events
Operational and environmental statistics
Global device nicknames
Online help
For more information, refer to the SANbox 3810 QuickTools Switch Management
User Guide.
1-8
S
59268-00 A