5–Windows Server 2003 and 2008 Driver Installation and Configuration
Windows Server Driver Configuration
Large Receive Offload (LRO)
Large Send Offload V1 IPv4
Large Send Offload V2 IPv4
Large Send Offload V2 IPv6
Locally Administered Address
5-10
Table 5-1. Advanced Properties Parameters (Continued)
Parameter
a
a
Description
This parameter specifies the large receive offload —
enable/disable options.
Registry Key: LRO
Default: Enabled
Values: Enabled/Disabled
This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV1IPv4
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV2IPv4
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
This parameter specifies the large send offload —
enable/disable options.
Registry Key: LsoV2IPv6
Default: Enabled
Values: Enabled/Disabled
Size of LSO: 64K maximum
This is the locally administered address (LAA) that
users/administrators can set on this interface to over-
ride the permanent address of the QLogic adapter
(that may have been flashed into the hardware).
Registry Key: NetworkAddress
Format: Hex
Options: Value. (A value is required — enter the
12 hex bytes of the MAC address to be used, or
not present.)
NE0154601-00 A