Section 2: Overview Of Parts And Accessories; What Is Included - Primera FX1200 Operator's Manual

Section 2: Overview of Parts and Accessories

Section 2.1: What is Included
The FX1200 includes everything you need to begin finishing labels immediately. The following
items are included.
•
Touch Screen Computer and power supply (refer to separate document attached to
exterior of the shipping crate for mounting instructions)
•
Euro and USA/Japan power cord located in supply box.
•
7 Slitter Blades. These are preinstalled in the unit.
•
10 Knives/Holders. Knives come preinstalled in color coded holders. You should
have 1 red knife, 2 green knives, 3 blue knives and 4 silver knives. These are located
in the supply box.
•
10 Plastic Depth Gauges. Depth gauges are used to adjust the blade depth. They
screw onto the end of the knife holders. They are only used in rare circumstances
where adjusting knife pressure is not a fine enough adjustment to prevent the knife
from puncturing the liner. (Section 3.3D)
•
Assortment of Cardboard Cores. (Located in the media box)
•
2 mm Hex Driver.
•
3mm Hex Driver.
•
Utility Knife
•
Starter Roll of Lamination Film – 500 feet.
6