Adjust Guides - Primera FX1200 Operator's Manual

3.8 Adjust Guides

The guide collars greatly affect how straight the web feeds through the FX1200. The guide
collars are adjusted at the factory for use with the paper stock sold by Primera. However, any
time you use a new roll there is a possibility that the width of the material is slightly different than
the last roll. If so, you may need to adjust the guides. Also, it is often necessary to move the
guide rollers in order to clean them. In this case you will also need to readjust the guide rollers.
Important Note: Before adjusting the guides always make sure the supply roll is pushed all the
way back and touching the supply mandrel guide disc!
Symptoms of Misaligned Guide Collars
1. The web is ripping or folding over on itself
2. Finished output is not wrapping straight.
3. Cut appears Skewed.
There are seven Guide Collars on the FX1200. Guides 3 and 4 are most important.
Skewed Cut
Cut
Guide Collars
Print
41