Section 3.5: Set Up the Slitter
1. Seven blades are preinstalled in the retracted position in your FX1200. The FX1200
slitter station allows you retract or engage slitting blades without removing them from
the unit. You will need to decide how many to engage to slit your labels. For example,
depending on what type of applicator will be used you may need to slit and remove
edge waste. Use this table as a guide.
Columns
Edge Waste
2. Press the release latches to open the slitter station.
Remove Edge Waste
1
2
2
3
3
4
4
5
5
6
6
7
7
Not Possible
8
Not Possible
Typical Slitter Configuration for Three Columns.
Slit Here
Blades Needed
Leave Edge Waste
0
1
2
3
4
5
6
7
Edge Waste
33