Power Supply - Foxconn 755 series User Manual

Power Supply

This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
ATX 12V Power Connector: PWR2
The 4 pin ATX 12V power supply connects to PWR2 and provides power to the
CPU.
ATX Power Connector: PWR1
PWR1 is the ATX power supply connector. Make sure that the power supply
cable and pins are properly aligned with the connector on the motherboard.
Firmly plug the power supply cable into the connector and make sure it is secure.
Attention:
You have to press the power button for more than four seconds if
you change the default Instant-off setting to "Delay 4 Sec" for the
"Soft-Off by Power Button" option in the BIOS Power Management
Setup.
16
755A01-032604.p65
Chapter 2 Installation Instructions
755/760A01 Series User Manual
16
ATX 12V Power Connector
1 2
G N D GND
12V
12V
3
4
ATX 20-pin Power Connector
5V G N D G N D G N D
5 V
-5V G N D PS-ON
20
10
1 2 V Pw-OK 5V 5V
5VSB G N D G N D G N D
2004-3-26, 15:28
3 . 3 V
- 1 2 V
11
1
3.3V
3 . 3 V