Foxconn 755 series User Manual page 54

Internal PCI/IDE (Default: Both)
This option is used to set the ports of onboard IDE. The available setting
values are: Disabled, Primary, Secondary and Both.
IDE Primary/Secondary Master/Slave PIO (Default: Auto)
These four items let you assign which kind of PIO(Programmer Input/Out
put) is used by IDE devices. Choose "Auto" to let the system auto detect
which PIO mode is the best or select a PIO mode from 0-4
Primary/Secondary Master/Slave UItraDMA (Default: Auto)
UItraDMA technology provides faster access to IDE devices.If you install a
device that supports UItraDMA, change the appropriate items on this list to
Auto. The available setting values are: Disabled and Auto.
IDE DMA transfer access (Default: Enabled)
This option is used to enable or disable IDE DMA transfer access.
IDE Burst Mode (Default: Enabled)
This option is used to enable or disable IDE burst mode.
46
755A01-032604.p65
SIS Onchip IDE Device Menu
755/760A01 Series User Manual
46
Chapter 3 BIOS Description
2004-3-26, 15:28