Foxconn 755 series User Manual page 73

Attaching Speakers
To perform multichannel audio operation, connect multiple speakers to the
system. You should connect the same number of speakers as the audio chan-
nels you will select in the software utility.
2-Channel Analog Audio Output
The audio connectors on the rear panel already provide 2-Channel analog au-
dio output. The rear panel's audio connectors can be transformed to 4-/6-Chan-
nel analog audio connectors automatically when you select the correct setting
in the software utility. For information about the setting, refer to Selecting 4- or 6-
Channel Setting later in this section.
Make sure all speakers are connected to Line-out connectors. Diverse connec-
tor configurations for 2-, 4- and 6-Channel using rear panel connectors are
described below:
2-Channel Analog Audio Output
Line-out (Front channels)
Description: Line-out, Line-in and Microphone functions all exist under 2-Channel
configuration.
755A01-032604.p65
Chapter 4 Driver CD Introduction
755/760A01 Series User Manual
65
Line-in
MIC
2004-3-26, 15:28
65