Foxconn 755 series User Manual page 31

1394 Header: F_1394(optional)
The 1394 expansion cable can be connected to either the front (provided that
the front panel of your chassis is equipped with the appropriate interface) or real
panel of the chassis.
Wake-up On LAN: WOL
Through the Wake-Up On LAN function, a wake event occurring from the net-
work can wake up the system. To utilize this function, please be sure to use an
ATX 12V power supply with a 5VSB line capable of delivering a current of at least
1A, and a LAN adapter which supports this function. Then connect the header to
the relevant connector on the LAN adapter, set "PCIPME Power Up Control" to
"Enabled" in the "Power Management Setup" section of the CMOS SETUP. Save
and exit, then boot the operating system once to make sure this function takes
effect.
755A01-032604.p65
Chapter 2 Installation Instructions
755/760A01 Series User Manual
23
1 2
TPA+ TPA-
GND
GND
TPB-
TPB+
+12V(Fused) +12V(Fused)
NC GND
9 10
F_1394
Signal for waking up
GND
1
+5VSB
WOL
2004-3-26, 15:28
23