Foxconn 755 series User Manual page 28

Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicator.
Hard Disk LED Connector (HD-LED)
Attach the connector to the HD-LED on the front panel of the case; the LED will
flash while the HDD is in operation.
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PWR-LED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the power supply status. When the system is in S0 status, the
LED is on. When the system is in S1 status, the LED is blink. When the system
is in S3, S4, S5 staus, the LED is off.
.
20
755A01-032604.p65
Chapter 2 Installation Instructions
755/760A01 Series User Manual
20
SIDE
1
PIDE
1 2
P W R - L E D
HD-LED
RESET-SW
NC
9 10
FPFP1!
2004-3-26, 15:28
P W R - S W