Setting R-Wave Amplitude; Numeric Codes For R-Wave-Amplitude Settings - Fluke Biomedical MPS450 Operator's Manual

MPS450
Operators Manual
100 ms
110 ms
120 ms
130 ms
140 ms
150 ms
160 ms
170 ms
180 ms
190 ms
200 ms

Setting R-Wave Amplitude

The MPS450 offers twenty preconfigured settings (mV) for R-wave amplitude on Lead
II: 0.05 to 0.50 (0.05 steps) and 0.50 to 5.50 (0.50 steps).
Action in the Menu-Control Mode
1. Press the top-menu key labeled PERF.
2. Select RWDET.
3. Select SEL to toggle to the screen for adjusting R-wave amplitude (width/AMPL),
4. Select DOWN or UP to scroll to the desired R-wave amplitude.
5. The amplitude identified on the LCD screen is active when displayed and remains
Alternatively, in the Numeric-Control Mode, press the number keys for R-wave
amplitude according to Table 2-21, and select RUN:
R-Wave-Amplitude Setting
0.05 mV
0.10 mV
0.15 mV
0.20 mV
0.25 mV
0.30 mV
0.35 mV
0.40 mV
0.45 mV
2-26
Table 2-20. Numeric Code R-Wave Width Settings (cont.)
R-Wave-Width Setting
with AMPL in upper-case letters.
active until another wave is selected.
Table 2-21. Numeric Codes for R-Wave-Amplitude Settings
Numeric Code
329
330
331
332
333
334
335
336
337
338
339
Numeric Code
292
293
294
295
296
297
298
299
300