Powering Up The Mps450 - Fluke Biomedical MPS450 Operator's Manual

Powering Up the MPS450

1. Power up the system by pressing the power-on/off key (the green key located on the
keypad of the unit, bottom/right). After one short beep, the LCD screen displays the
following startup message:
2. After a three-second display test, the following top menu displays:
Once you have the MPS450 up and running, please fill out the Registration
Card and mail it to Fluke Biomedical.
Note
Introduction and Specifications

Powering Up the MPS450

gje001.eps
gje002.eps
1
1-7