Parameter Viewing List - Fluke Biomedical MPS450 Operator's Manual

View
Wave/Function
Page
ECG NSR
ECG performance
1
ECG R-wave detection
ECG Arrhythmia
Fetal/maternal
2 Respiration
3 Blood Pressure
Temperature/Cardiac Output
4
2. Select < or > to cycle through the other three VIEW pages, which display as screens
similar to the following:
3. To exit viewing, press the VIEW key again, or press the ESC key to return to the
previous control mode.
4. While viewing settings, the MODE key is inactive. Press the ESC key to exit
Table 1-4. Parameter Viewing List
Current Parameters Displayed
NSR rate, patient type, ST-segment elevation, NSR amplitude,
and ECG artifact.
Performance wave and amplitude
R-wave rate, width, and amplitude
Arrhythmia and ECG artifact
IUP wave, IUP period, and fetal heart rate
Respiration rate, amplitude, lead, and baseline
BP sensitivity; and settings BP1, BP2, BP3, BP4
Temperature, thermistor, cardiac-output wave, and
CO-injectate temperature and flow
Introduction and Specifications
Viewing Current MPS450 Parameters
gje004.eps
gje005.eps
gje006.eps
1
1-11