Introduction - Fluke ProcessMeter 787 Calibration Manual

Introduction

The information provided in this manual is for the use of qualified
personnel only. Do not perform the verification tests or calibration
procedures described in this manual unless you are qualified to do so.
The 787 ProcessMeter
discharge. No procedure in this document requires the case to be
opened. If you do so, follow the standard practices for handling static
sensitive devices.
The Calibration Manual for the 787 ProcessMeter (hereafter, also referred to as "the
ProcessMeter" or "the UUT") provides the following information:
Precautions and Safety information
Specifications
Basic maintenance (cleaning, replacing the battery and fuses)
Verification test procedures
Calibration and calibration adjustment procedures
Accessories and replaceable parts
For complete operating instructions, refer to the 787 ProcessMeter Users Manual (on the
CD-ROM provided).
To contact Fluke, call:
USA : 1-888-99-FLUKE (1-888-993-5853)
Europe: +31 402-678-200
Singapore: +65-738-5655
Address correspondence to:
Fluke Corporation
P.O. Box 9090,
Everett, WA 98206-9090
USA
Or visit us on the World Wide Web: www.fluke.com
Calibration Manual
Warning
Caution
contains parts that can be damaged by static
Canada: 1-800-36-FLUKE (1-800-363-5853)
Japan: +81-3-3434-0181
Anywhere in the world: +1-425-446-5500
Fluke Europe B.V.
P.O. Box 1186,
5602 BD Eindhoven
The Netherlands
1