Fluke RF303 Operator's Manual page 4

Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization
(RMA) number, obtained from our Order Entry Group at 1-800-648-7952 or 1-425-446-6945.
Repair and calibration:
To find the nearest service center, go to www.flukebiomedical.com/service, or
In the U.S.A.:
Cleveland Calibration Lab
Tel: 1-800-850-4606
Email: globalcal@flukebiomedical.com
Everett Calibration Lab
Tel: 1-888-99-FLUKE (1-888-993-5853)
Email: service.status@fluke.com
In Europe, Middle East, and Africa:
Eindhoven Calibration Lab
Tel: +31-402-675300
Email: ServiceDesk@fluke.com
In Asia:
Everett Calibration Lab
Tel: +425-446-6945
Email: service.international@fluke.com
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical's manu-
facturing specifications when it was shipped from the factory. Calibration measurements are traceable
to the National Institute of Standards and Technology (NIST). Devices for which there are no NIST
calibration standards are measured against in-house performance standards using accepted test proce-
dures.
WARNING
Unauthorized user modifications or application beyond the published specifications may re-
sult in electrical shock hazards or improper operation. Fluke Biomedical will not be responsi-
ble for any injuries sustained due to unauthorized equipment modifications.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment by
Fluke Biomedical. Changes made to the information in this document will be incorporated in
new editions of the publication. No responsibility is assumed by Fluke Biomedical for the use
or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its af-
filiated dealers.
Manufacturing Location
The RF303 Electrosurgical Analyzer is manufactured in Everett, Washington by Fluke Bio-
medical, 6920 Seaway Blvd., Everett, WA, U.S.A.