License:
...
SysHealth Check:
Recovery Mode:
Transceiver Diag:
Fdb-Scan Diag:
System Watchdog:
...
Transceiver Diagnostic Result Analysis
• If transceiver test error counters are incrementing, but there is no associated log message, the
problem is probably a transient problem. You should continue to monitor the counter.
• If transceiver test error counters are incrementing and there is a log message, you should perform
further analysis and diagnostics to isolate the problem.
Advanced System Diagnostics and Troubleshooting Guide
Full L3 + Security
Enabled.
Alarm Level = Log
None
Enabled.
Failure action: sys-health-check
Enabled.
Failure action: sys-health-check
Enabled.
Transceiver Diagnostics
87