Software Exception Handling
On BlackDiamond switches you can configure the number of times the slave MSM can reboot within a
configured time limit or configure the slave MSM to use the global reboot-loop-protection configuration.
Use on the of the following commands:
configure reboot-loop-protection backup-msm threshold <time-interval> <count>
Or
configure reboot-loop-protection backup-msm threshold use-master-config
Use this command to configure the switch to use the global reboot-loop-protection configuration.
where:
The time period, in minutes, during which the slave MSM is permitted to reboot the
time-interval
number of times specified in count, before entering minimal mode. The period is a
number in the range from 0 to 255 minutes. The recommended setting is 10 minutes.
The number of reboots within the period specified as time-interval. The count is a
count
number in the range from 1 reboot to 7 reboots.
44
Advanced System Diagnostics and Troubleshooting Guide