Advertisement
ASSEMBLY
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by almost anyone
However. the weight
bench has many parts and the assembly
process will take time. By setting aside plenty of
time_ assembly will go smoothly.
Before beginning
assembly,
carefully read the
following
information and instructions:
. Assembly requires two people.
* Because of its weight and size, the weight bench
should be assembled in the location where it will
be used. Make sure that there is enough clear-
ance to walk around the weight bench as you
assemble it.
* Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
° As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
° For help identifying
small parts, use the PART
iDENTiFICATION
CHART.
The included grease, and the following
tools
(not included) may be required
for assembly:
. Two adjustable
wrenches
. One rubber mallet
. One standard
screwdriver
, One Phillips
screwdriver
, Clear tape or masking
tape, and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Before
beginning
assembly, make sure you
understand
the information in the box
above.
For help identifying small parts, use
the PART iDENTIFiCATiON
CHART in the
center of this manual.
Lift the Weight Rest (7) in the Left Upright (6) and
secure it with a Weight Rest Knob (23).
Orient the Crossbar (4) as shown. Attach the
Crossbar to the Left Upright (6) with two Joint
Plates (18), four MIO x 75mm Bolts (42), and four
MIO Nylon Locknuts (43). Do not tighten the
Locknuts.
Attach the Crossbar
(4) to the Right Upright
(5) in the same manner.
Name
Decal
18
18
Advertisement
