Table of Contents
Advertisement
8ТЕР6
BENCH PRESS ASSEMBLY
HARDWARE
ыы
2.
[1 Remove WEIGHT SELECTOR РІМ (86) from welght stack so there
із no load on leg extension and it can be swung forward and out
of the way.
Se qe
RINE
› .
О Press 1 1/2" SQUARE
OPEN
END
PLASTIC CAP (55) onto each
end of BENCH
PRESS ARMS (18).
Slide arms onto PIVOT TUBE
(15) and up against Plastic Shroud.
Î next, assemble
ROLLER
BRACKETS
(16), with angled
corners
upwards, to the center tube on BENCH
PRESS
CROSS
BRACE
(17) with 5/16" X 2 1/4" HEX HEAD
BOLTS
(77) and 5/16" HEX
NUTS (75).
П Press 1 1/2" SQUARE PLASTIC CAPS (54) into ends of Cross Brace.
C] знае SMALL FOAM GRIPS (59) onto handles and cap with 1 1/4" ROUND PLASTIC CAPS (60).
STEP 7
LEG EXTENSION ASSEMBLY
HARDWARE
Advertisement
Table of Contents
