Table of Contents
Advertisement
FRAM E ASSEM B LY
1.
Before beginning assembly, be sure that you have
read and understand the information in the box
above.
Locate and open the parts bags labeled "FRAME
ASSEMBLY BAG ONE" and "FRAME ASSEMBLY
BAG TWO."
Press two 2" Square Outer Caps (58) onto the indi-
cated ends of the Weight Base (14). Press a 2"
Square Inner Cap (56) into the end of the Weight
Base.
Insert two 5/16" x 2 1/2" Carriage Bolts (49) up
through the indicated holes in the Weight Base (14).
Insert two 5/16" x 2 1/4" Carriage Bolts (61) up
through the other holes in the Weight Base.
Insert four 5/16"x 2 1/2" Carriage Bolts (49) up
through the Press Base (13).
Attach the Press Base (13) to the Weight Base (14)
with two 5/16" x 2 3/4" Bolts (55), two 5/16" Washers
(20) and two 5/16" Nylon Locknuts (40). Do not tight-
en the Nylon Locknuts yet.
14
\
56
58
55
40
49
20
13
58
,
Slide the Ab Upright (1) onto the indicated
5/16" x 2 1/2" Carriage Bolts (49) in the Weight Base
(14). Hand tighten two 5/16" Nylon Locknuts (40) onto
the Carriage Bolts. Do not tighten the Nylon
Locknuts yet.
Slide the Leg Press Upright (4) onto the indicated
5/16" x 2 1/2" Carriage Bolts (49) in the Press Base
(13). Hand tighten two 5/16" Nylon Locknuts (40) onto
the Carriage Bolts. Do not tighten the Nylon
Locknuts yet.
49
13
5
Hide quick links:
Advertisement
Table of Contents
