Weider PRO 9925 User Manual page 22

61. Attach a Butterfly Pad (22) to the Left Fly Arm (6) with
two 1/4" x 2 1/4" Bolt (63) and two 1/4" Washers (37).
Repeat this step for the Right Fly Arm (5).
22
62. Attach the Curl Pad (77) to the Curl Post (51) with
four 1/4" x 3/4" Bolts (59).
62
51
63. Attach the two name decals to the Uprights about 3"
down from the top of the Uprights, as shown.
63
64. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in
HOW TO USE THE HOME GYM SYSTEM, beginning on page 23 of this manual.
Before using the home gym system, pull each cable a few times to be sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If
the cables are not properly installed, they may be damaged when heavy weight is used. See the
CABLE DIAGRAMS on page 26 and 27 of this manual for proper cable routing. If there is any slack
in the cables, you will need to remove the slack by tightening the cables. See TROUBLE-SHOOTING
AND MAINTENANCE on page 25.
22