Weider PRO 9925 User Manual page 7

Insert two Weight Guides (23) into one of the brack-
ets on the Weight Base (14). Attach the lower ends of
the Weight Guides with a 5/16" x 6" Bolt (67), two
1/2" x 3/4" Spacers (69), and a 5/16" Nylon Locknut
(40). Do not overtighten the Nylon Locknut.
Attach the other Weight Guides (23) in the same
manner.
14
69
,
Slide a Weight Bumper (27) onto each of the Weight
Guides (23).
Slide eight Weights (90) onto each set of Weight
Guides (23). Make sure the pin grooves are on the
indicated side of each stack of Weights.
8
90
Pin
Grooves
23
23
90
Pin
,
Press a Weight Tube Bumper (26) into each Weight
Tube (25).
Insert a Weight Tube (25) into each stack of Weights
(90). Make sure the pins on the Weight Tubes are
in the pin grooves in the upper Weights.
9
Pin
Grooves
90
7